Search Results for: grundfos

GRUNDFOS MS402B 1.1KW 415V 50Hz SUBMERSIBLE MOTOR

DESCRIPTION

Grundfos MS 402B

GRUNDFOS WAVE FILTER V700 DIA28″ MULTIPORT CLAMP 40MM

DESCRIPTION

The “V” series Fiber glass top mount flange/clamp style filter is constructed of the highest quality non-corrosive material for use in residential, commercial and industrial filtration applications, with minimum maintenance.

 

FEATURES AND BENEFITS

  • Bobbin-­wound fiberglass reinforced tank
  • UV and weather resistant – can be used outside in direct sunlight
  • six-­position, clamp style multiport valve and ABS laterals.
  • Stainless steel oil-damped pressure guage
  • Clea-view backwash optic
  • Ideal for domestic in-ground and above-ground poolsand hot spas
  • Maximum operating pressure 2.5 bar (36 psi)
  • 5″ ports (also available with 2″ ports – Model V700B)
  • Can be used with sand, Zellbrite™, or DiamondKleen™

 

SPECIFICATION

TECHNICAL DATA

Dimension(mm): 710(A) x 500(B) x 1020(C) x 845(D) x 905(E)

Filter Area (m2) : 0.40

Valve Connections: 1 ½ Inch / 50mm

Max Flow Rate: 325 lpm / 19.50 m3/h

Sand (kg): 210kg

GRUNDFOS WAVE FILTER V500 DIA21″ MULTIPORT CLAMP 40MM

DESCRIPTION

The “V” series Fiber glass top mount flange/clamp style filter is constructed of the highest quality non-corrosive material for use in residential, commercial and industrial filtration applications, with minimum maintenance.

 

FEATURES AND BENEFITS

  • Bobbin-­wound  fiberglass reinforced  tank
  • UV and weather resistant – can be used outside in direct sunlight
  • six-­position, clamp style multiport valve and ABS laterals.
  • Stainless steel oil-damped pressure guage
  • Clea-view backwash optic
  • Ideal for domestic in-ground and above-ground poolsand hot spas
  • Maximum operating pressure 2.5 bar (36 psi)
  • 5″ ports (5V700 also available with 2″ ports – Model V700B)
  • Can be used with sand, Zellbrite™, or DiamondKleen™

 

SPECIFICATION

TECHNICAL DATA

Dimension(mm): 535(A) x 500(B) x 845(C) x 670(D) x 730(E)

Filter Area (m2) : 0.22

Valve Connections: 1.5 Inch / 50mm

Max Flow Rate: 185 lpm / 11.10 m3/h

Sand (kg): 85kg

GRUNDFOS UPS25-60-180 CIRCULATOR PUMP C/W 130W 400V THREE PHASE 50HZ MOTOR

DESCRIPTION

Cast Iron Construction for Heating & Cooling Applications. 25mm Ports, 180mm between centres

The GRUNDFOS UPS 25-60 can be used in both open and closed systems. UPS pumps are of the canned-rotor type, i.e. pump and motor form an integral unit without a shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.

 

APPLICATION

  • One- and two-pipe heating systems
  • Boiler shunt pumps
  • Pumps for heating surfaces
  • Calorifiers
  • Underfloor heating systems
  • Solar heating systems
  • Heat pump systems
  • Geothermal heating systems
  • Heat recovery systems
  • Two-pipe air-conditioning systems
  • Pumps for refrigeration units.

 

FEATURES AND BENEFITS

  • Maintenance-free
  • Low noise
  • Low energy

GRUNDFOS UNI-E CM5-5 DOMESTIC VARIABLE SPEED BOOSTER PUMP C/W 1.2KW MOTOR & 8L TANK

DESCRIPTION

UNI-E CM Pump Series 5-5 c/w 8liter pressure tank and Inverter unit with adjustable pressure setting with built-in dry-running protection for automatic start/stop to provide and deliver instant water supply with constant and uninterrupted pressure for your daily needs.

 

FEATURES AND BENEFITS

-Longer life – Major pump components are manufactured from corrosion and wear resistant stainless steel.
-Quiet Operation – Both pump and motor are designed for low operation noise <54dB(A) to provide a comfortable environment.
-Quality Assurance – Each UNI-E CM is factory assembled and tested before delivery.
-Product certified by SIRIM
-Energy saving
-Constant pressure driven by INVERTER
-Eliminates water hammering
-Space saving
-Easy installation, setting and operation
-Built-in overload protection with Auto restart on power failure

 

SPECIFICATION

Dimension (L x H x W)mm : 400 x 650 x 400mm

Pump Connection: RP 1 ¼” / RP 1”

GRUNDFOS UNI-E CM5-4 DOMESTIC VARIABLE SPEED BOOSTER PUMP C/W 0.84KW 230V MOTOR,8L TANK

DESCRIPTION

UNI-E CM Pump Series 5-5 c/w 8liter pressure tank and Inverter unit with adjustable pressure setting with built-in dry-running protection for automatic start/stop to provide  and deliver instant water supply with constant and uninterrupted pressure for your daily needs.

 

FEATURES AND BENEFITS

-Longer life – Major pump components are manufactured from corrosion and wear resistant stainless steel.
-Quiet Operation – Both pump and motor are designed for low operation noise <54dB(A) to provide a comfortable environment.
-Quality Assurance – Each UNI-E CM is factory assembled and tested before delivery.
-Product certified by SIRIM
-Energy saving
-Constant pressure driven by INVERTER
-Eliminates water hammering
-Space saving
-Easy installation, setting and operation
-Built-in overload protection with Auto restart on power failure

 

SPECIFICATION

Dimension (L x H x W)mm: 400 x 650 x 400mm

Pump Connection: RP 1 ¼” / RP 1”

 

GRUNDFOS UNI-E CM3-5 DOMESTIC VARIABLE SPEED BOOSTER PUMP C/W 0.65KW MOTOR & 8L TANK

DESCRIPTION

UNI-E CM Pump Series 5-5 c/w 8liter pressure tank and Inverter unit with adjustable pressure setting with built-in dry-running protection for automatic start/stop to provide  and deliver instant water supply with constant and uninterrupted pressure for your daily needs.

 

FEATURES AND BENEFITS

– Longer life – Major pump components are manufactured from corrosion and wear resistant stainless steel.
-Quiet Operation – Both pump and motor are designed for low operation noise <54dB(A) to provide a comfortable environment.
-Quality Assurance – Each UNI-E CM is factory assembled and tested before delivery.
-Product certified by SIRIM
-Energy saving
-Constant pressure driven by INVERTER
-Eliminates water hammering
-Space saving
-Easy installation, setting and operation
-Built-in overload protection with Auto restart on power failure

 

SPECIFICATION

Dimension (L x H x W) mm: 350 x 650 x 400mm

Pump Connection: RP 1” / RP 1”

 

GRUNDFOS UNI-E CM10-2 DOMESTIC VARIABLE SPEED BOOSTER PUMP C/W 1.2KW 230V MOTOR,8L TANK

DESCRIPTION

UNI-E CM Pump Series 10-2 c/w 8liter pressure tank and Inverter unit with adjustable pressure setting with built-in dry-running protection for automatic start/stop to provide and deliver instant water supply with constant and uninterrupted pressure for your daily needs.

 

FEATURES AND BENEFITS

  • Easy setpoint adjustment
  • Actual pressure readout
  • Constant pressure via variable speed drive for optimum comforst
  • Energy saving
  • Built-in overload protection
  • Low operation noise
  • Auto restart on power failure
  • Low voltage dry run float sensor connector
  • Dry running (secondary) protection with built-in VSD
  • Plug and play capability
  • Less initial investment in reduced-dimension systems
  • Easy installation, setting and operation

 

SPECIFICATION

Power Input: 1600 Watt

Max Flow: 15.0 m3/hr or 15000 liter/hr

Max Header: 28m

Pipe Connection: 1 ½” Inlet/ 1”outlet

Dimension (L x H x W mm): 400 x 700 x 200

GRUNDFOS SP9-11 S/STEEL SUBMERSIBLE PUMP C/W 2.2KW 3PHASE 415V 50Hz ELEC. MOTOR

DESCRIPTION

Grundfos’s range of SP Multi-stage submersible pumps for raw water supply, groundwater lowering and pressure boosting. These pumps are suitable for pumping clean, thin, non-agressive liquids without solid particles or fibres.

Grundfos SP9-11 4″ EuP Ready Energy Efficient Submersible Borehole Pump with 415V 3Ph 50Hz, 2.20kW direct coupled 2900rpm electric motor, suitable for pumping clean water. Can be installed vertically or horizontally. All steel components are made in stainless steel, EN 1.4301 (AISI 304), that ensures high corrosive resistance. This pump carries drinking water approval.

The pump is fitted with a 2.2kW MS402 motor with sand shield, lip seal, water-lubricated journal bearings and a volume compensating diaphragm. The motor is a canned type submersible offering good mechanical stability and high effeciency. Suitable for temperatures up to 40 °C.  The motor is not fitted with a temperature sensor. If temperature monitoring is desired, a Pt1000 sensor can be fitted.

The motor is for direct-on-line starting (DOL).

 

SPECIFICATION

Pump Type: Borehole/ Well Pumps

Material: Stainless Steel

Voltage: 415V 3Ph 50Hz

Dimension: 1175mm (H) x 101mm (Diameter)

Weight: 25.1kg

Max. Flow: 11.6m3/hr

Max. Head: 71.2m

Motor Size (kW/W): 2.2kW

Full Load Current (FLC): 5,50-5,50-5,70 A

Single/Twin: Single Head

GRUNDFOS SP5A-17 SUBMERSIBLE PUMP C/W 1.5KW 415V 50HZ ELECTRIC MOTOR

DESCRIPTION

Submersible borehole pump, suitable for pumping clean water. Can be installed vertically or horizontally. All steel components are made in stainless steel, EN 1.4301 (AISI 304), that ensures high corrosive resistance. This pump carries drinking water approval. The pump is fitted with a 2 kW MS402 motor with sand shield, lip seal, water-lubricated journal bearings and a volume compensating diaphragm. The motor is a canned type submersible motor offering good mechanical stability and high efficiency. Suitable for temperatures up to 40 °C. The motor is not fitted with a temperature sensor. If temperature monitoring is desired, a Pt1000 sensor can be fitted. The motor is for direct-on-line starting (DOL).

 

SPECIFICATION

TECHINICAL DATA

Speed for pump data: 2900 rpm

Rated flow: 22 US GPM

Rated head: 229.7 ft

Shaft seal for motor: LIPSEAL

Curve tolerance: ISO9906:2012 3B

Pump Type: SP5A

Stages: 17

Model: A

Valve: pump with built-in non-return valve

 

Materials

Pump: Stainless Steel

Pump: EN 1.4301

Impeller: Stainless Steel

Impeller: EN 1.4301

Motor: Stainless Steel

Motor: DIN W.-Nr. 1.4301

Motor: AISI 304

 

Liquid

Pumped liquid: Water

Maximum liquid temperature: 104⁰F

Max Liquid at 0.15 m/sec: 104⁰F

Liquid temperature during operation: 68⁰F

Density: 62.29 lb/ft3

 

Electrical Data

Motor type: MS402

Applic. Motor: NEMA

Rated Power – P2: 2 HP

Mains frequency: 50 Hz

Rated voltage: 3 x 380 – 400 – 415 V

Rated current: 4,10-4, 20-4, 40 A

Starting current: 490 – 500%

Cos phi – power factor: 0,80-0,75-0,70

Rated Speed: 2850 – 2860 – 2870 rpm

Start method: direct-on-line

Enclosure class (IEC 34-5): IP68

Insulation class (IEC 85): B

Motor protect: NONE

Thermal protect: external

Built-in temp transmitter: no

Motor No: 79192006

 

Others

Minimum efficiency index, MEI>: 0.56

ErP status: EuP Standalone / Prod

Net Weight: 35.3 lb

Gross Weight: 39.2 lb

Shipping volume: 424 ft3


THV1 designed by PAKO®